EN 940-2012 木工机械的安全.组合式木材加工机械
　　
　　BS EN 940:2009+A1:2012
　　
　　Safety of woodworking machines. Combined woodworking machines
　　
　　This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable combined woodworking machines with two or more of only the following integrated units: surface planing, circular sawing (working simultaneously or not with vertical spindle moulding unit), vertical spindle moulding, boring [mortising] and thickness planing, hereinafter referred to as machines, designed to cut solid wood, chipboard, fibreboard, plywood, and also these materials where they are covered with plastic laminates or edging or veneer, when they are used as intended and under the conditions foreseen by the manufacturer. This document does not apply to combined machines which consist only of a surface planing unit and a thickness planing unit; combined machines with a band saw unit; transportable motor-operated electric combined tools, or any adaptation permitting their use in a different mode, i.e. bench mounting; machines with mortising unit driven by a separate motor. This document is not applicable to combined woodworking machines which are manufactured before the date of its publication as EN.
　　
　　Standard Number
　　
　　BS EN 940:2009+A1:2012
　　
　　TitleSafety of woodworking machines. Combined woodworking machines
　　
　　StatusSuperseded, Withdrawn
　　
　　Publication Date
　　
　　31 October 2009
　　
　　Conformity to regulation
　　
　　Designated
　　
　　Withdrawn Date
　　
　　16 April 2020
　　
　　Normative References(Required to achieve compliance to this standard)
　　
　　ISO 7960:1995, EN 50370-2:2003, EN 50370-1:2005, ISO 4871:1996, ISO 13850:2006, EN 848-1:2007/AMD 2:2012, EN 860:2007/AMD 2:2012, IEC 60204-1:2005, EN 894-3:2000/AMD 1:2008, EN ISO 4871:2009, EN ISO 13857:2008, EN 1005-3:2002/AMD 1:2008, EN ISO 12100:2010, ISO 12100:2010, EN ISO 3746:2010, EN ISO 13849-1:2008, ISO 13849-1:2006, IEC 60439-1:1999, EN 349:1993, prEN 1870-18:2011, EN 614-1:2006/AMD 1:2009, EN 1037:1995/AMD 1:2008, EN 861:2007/AMD 2:2012, EN ISO 13850:2008, EN 894-2:1997/AMD 1:2008, ISO 3746:2010, EN 847-1:2005/AMD 1:2007, EN ISO 4414:2010, EN ISO 4413:2010, ISO 4414:2010, EN 1088:1995/AMD 2:2008, EN 60439-1:1999, EN 60204-1:2006, EN 859:2007/AMD 2:2012, ISO 4413:2010, ISO 13857:2008