天花板|石膏板|玻镁板|钢结构|铝塑板|报警器CE认证

  天花板|石膏板|玻镁板|钢结构|铝塑板|报警器CE认证

  我们常见的一些产品,譬如吊顶(天花板),纤维水泥板,龙骨,氧化镁板(玻镁板),高压板,铝塑板单板,复合板,石膏板,报警器(火灾系统),预制混凝土产品,钢结构等,出口欧洲市场,也是需要强制性进行CE认证的。

  认证标准如下:

  标准描述

  EN 13964:2004Suspended ceilings – Requirements and test methods 吊顶。要求和试验方法

  EN 14195:2005Metal framing components for gypsum plasterboard systems – Definitions, requirements and test methods石膏灰泥板系统用金属框架元件。定义、要求和试验方法

  EN 12467:2006Fibre-cement flat sheets – Product specification and test methods纤维水泥平板材。产品规范和试验方法

  EN 438-1:2005High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (Usually called Laminates) 装饰用高压层压板(HPL)。热固性树脂基板材(一般称为层压板)

  EN 520:2004Gypsum plasterboards – Definitions, requirements and test methods 石膏板。定义、要求和试验方法

  EN 485-1:2008Aluminium and aluminium alloys – Sheet, strip and plate – Part 1: Technical conditions for inspection and delivery 铝和铝合金。薄板材、带材和厚板材。第1部分:检验和交货技术条件

  EN 54-1:1996Fire detection and fire alarm systems – Part 1: Introduction 火警装置。第1部分:导语

  EN 54-2:1997Fire detection and fire alarm systems-Part 2:Control and indicating equipment 火灾探测和火灾警报系统。控制和指示设备

  EN 54-3:2001Fire detection and fire alarm systems – Part 3: Fire alarm devices – Sounders 火灾探测和报警系统。第3部分:火灾报警装置。警笛

  EN 54-4:1997Fire detection and fire alarm systems – Part 4: Power supply equipment 火灾探测和报警设备。第4部分:供电设备

  EN 54-5:2001Fire detection and fire alarm systems – Part 5:Heat detectors-Point detectors 火灾探测和报警系统 第5部分:点型感温探测器

  EN 54-6:1989components of automatic fire detection systems; part 6: heat sensitive detectors; rate of rise point detectors without a static element 自动火灾报警装置组件。第6部分:热敏报警器。无静态元件的点状差动报警器

  EN 54-7:2001fire detection and fire alarm systems – part 7: smoke detectors; point detectors using scattered light, transmitted light or ionization 火灾探测和火灾报警系统。第7部分:烟探测器。使用散射光传输光或电离物的烟探测器

  EN 12843:2004Precast concrete products – Masts and poles 预制混凝土产品。杆和柱

  EN 13225:2004Precast concrete products – Linear structural elements 预铸混凝土产品。线性结构元件

  EN 13693:2004Precast concrete products – Special roof elements 预制混凝土产品。特殊屋顶组件

  EN 10025-1:2004 Hot rolled products of structural steels – General technical delivery conditions 结构钢热轧制品。一般交货技术条件

  EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels- Part 1: Technical delivery conditions非合金结构钢和细晶粒结构钢的冷成形结构空心型材。第1部分:交货技术条件

  EN 10210-1:2006Hot finished structural hollow sections of non-alloy and fine grainsteels – Part 1: Technical delivery conditions 非合金结构钢和晶粒结构钢制的钢构件用热成型空心型件。第1部分:交货技术要求

  EN 15088:2005Aluminium and aluminium alloys – Structural products for construction works Technical conditions for inspection and delivery 铝和铝合金。施工作业用结构产品。检验和交付用技术条件

分享到: