欧盟测试标准和协调标准

EN 10244-2-2009 钢丝和钢丝产品.第2部分:锌或锌合金镀层

  EN 10244-2-2009 钢丝和钢丝产品.第2部分:锌或锌合金镀层

  BS EN 10244-2:2009

  Steel wire and wire products. Non-ferrous metallic coatings on steel wire – Zinc or zinc alloy coatings

  Normative References

  Required to achieve compliance to this standard

  ASTM B 750

  BS EN 10218-1:2012

  BS EN 10244-1:2009

  BS EN 1179:2003

  BS ISO 7802:2013

  BS ISO 7989-2:2007

  Informative References

  Provided for Information

  BS ISO 7989-1:2006

  Product Details

  Descriptors

  Non-ferrous metals, Adhesion tests, Gravimetric analysis, Zinc, Steels, Metal coatings, Wires, Adhesion, Mass, Coatings, Zinc alloys

  ICS Codes

  25.220.40 Metallic coatings

  77.140.65 Steel wire, wire ropes and link chains

  Committee

  ISE/106

  ISBN

  978 0 580 62603 6

  Publisher

  BSI

分享到:

EN 13305-2009 沥青和沥青粘合剂.硬质工业沥青的规范框架

  EN 13305-2009 沥青和沥青粘合剂.硬质工业沥青的规范框架

  BS EN 13305:2009

  Bitumen and bituminous binders. Framework for specification of hard industrial bitumens

  Normative References

  Required to achieve compliance to this standard

  BS EN 12592:2014

  BS EN 13303:2017 – TC

  BS EN 1426:2015 – TC

  BS EN 1427:2015 – TC

  BS EN 15326:2007+A1:2009

  BS EN ISO 2592:2017

  EN ISO 2592:2000

  Informative References

  No other standards are informatively referenced

  Product Details

  Descriptors

  Mastics, Floor coverings, Synthetic rubber, Bituminous products, Roof coverings, Penetration tests, Hardness, Flash point, Bitumens, Varnishes, Industrial, Solubility, Softening point, Binding agents

  ICS Codes

  75.140 Waxes, bituminous materials and other petroleum products

  91.100.50 Binders. Sealing materials

  Committee

  B/510/19

  ISBN

  978 0 580 63912 8

  Publisher

  BSI

分享到:

EN 60745-2-15-2009 第2-15部分:绿篱修剪器的特殊要求

  EN 60745-2-15-2009 第2-15部分:绿篱修剪器的特殊要求

  BS EN 60745-2-15:2009+A1:2010

  Hand-held motor-operated electric tools. Safety – Particular requirements for hedge trimmers

  Normative References

  Required to achieve compliance to this standard

  ISO 11094:1991

  BS ISO 3864-3:2012

  ISO 3864-3:2006

  Informative References

  Provided for Information

  2006/42/EC

  98/37/EC

  98/79/EC

  Product Details

  Descriptors

  Hedge trimmers, Linear motion, Portable machine tools, Gardening equipment, Electrically-operated devices, Horticultural equipment, Blades, Electric motors, Reciprocating parts, Equipment safety, Machine tools, Electrical safety

  ICS Codes

  25.140.20 Electric tools

  65.060.80 Forestry equipment

  Committee

  CPL/116

  ISBN

  978 0 580 62781 1

  Publisher

  BSI

分享到:

EN 13042-5-2009 第5部分:压力机

  EN 13042-5-2009 第5部分:压力机

  BS EN 13042-5:2003+A1:2009

  Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements – Presses

  Normative References

  Required to achieve compliance to this standard

  BS EN 1037:1995+A1:2008

  BS EN 12464-1:2002

  BS EN 349:1993+A1:2008

  BS EN 60204-1:2006+A1:2009

  BS EN 61508-5:2010

  BS EN 953:1997+A1:2009

  BS EN 982:1996+A1:2008

  BS EN 983:1996+A1:2008

  EN ISO 11201:1995

  EN ISO 11202:1995

  EN ISO 11204:1995

  BS EN ISO 11688-1:1998

  BS EN ISO 12100-1:2003+A1:2009

  BS EN ISO 12100-2:2003+A1:2009

  BS EN ISO 13849-1:2008

  BS EN ISO 13850:2008

  EN ISO 4871:1996

  IEC 60204-1:2005

  IEC 61508-5:1998

  IEC 61508-5:1998/Corrigendum:1999

  ISO 11201:1995

  ISO 11202:1995

  ISO 11204:1995

  BS EN ISO 12100-1:2003+A1:2009

  BS EN ISO 12100-2:2003+A1:2009

  BS EN ISO 13849-1:2006

  BS EN ISO 13850:2006

  ISO 4871:1996

  ISO/TR 11688-1:1995

  Informative References

  Provided for Information

  2006/42/EC

  98/37/EC

  98/79/EC

  BS EN 13042-1:2007+A1:2009

  BS EN 13042-2:2004+A1:2009

  BS EN 13042-3:2007+A1:2009

  Product Details

  Descriptors

  Instructions for use, Stopping, Hazards, Safety measures, Occupational safety, Verification, Safety devices, Pressing (forming), Production equipment, Glass, Machine tools, Presses, Control devices, Starting, Equipment safety, Containers, Hollow, Electrical equipment, Marking, Interlocks

  ICS Codes

  81.100 Equipment for the glass and ceramics industries

  Committee

  MCE/3/13

  ISBN

  978 0 580 71073 5

  Publisher

  BSI

分享到:

EN 1837-2009 机械安全.机器的组合照明

  EN 1837-2009 机械安全.机器的组合照明

  BS EN 1837:2020

  Safety of machinery. Integral lighting of machines

  Normative References

  Required to achieve compliance to this standard

  BS EN 12464-1:2011

  BS EN 12464-2:2014

  BS EN 12665:2018 – TC

  BS EN 1838:2013

  BS EN 60204-1:2018

  BS EN 60204-31:2013

  BS EN 60204-32:2008

  BS EN 60204-33:2011

  EN 60529:1991

  EN 60529:1991/A2:2013

  EN 60529:1991/A2:2013/AC:2019-02

  BS EN 60598-1:2015+A1:2018

  BS EN 60598-1:2015+A1:2018

  BS EN 62262:2002+A1:2021

  BS EN ISO 13732-1:2008

  Informative References

  Provided for Information

  CIE TN 006:2016

  BS EN 60357:2003+A11:2016

  BS EN 60901:1996+A6:2017

  BS EN 60968:2015

  BS EN 60969:1993

  BS EN 61195:1999+A2:2015

  BS EN 61199:2011+A2:2015

  BS EN 62031:2008+A2:2015

  BS EN 62717:2017+A2:2019

  Product Details

  Descriptors

  Verification, Instructions for use, Illuminance, Internal, Artificial lighting, Machine tools, Installation, Equipment safety, Maintenance, Accident prevention, Production equipment, Safety measures, Lighting systems, Luminaires, Occupational safety, Lamps

  ICS Codes

  13.110 Safety of machinery

  91.160.10 Interior lighting

  Committee

  EL/1

  ISBN

  978 0 539 01764 9

  Publisher

  BSI

分享到: